How to install razor concertina wire
How to install razor concertina wire
More and more homeowners become to concern privacy and security, especially those who live on a lot of property. There are many options available to keep unwanted visitors out of a specific area, such as razor concertina wire, tall fences spanning for miles that usually incorporate some sort of barbed wire, Razor wire is a very effective way to keep people or animals out of a given area, razor wire also can be used on perimeters of prisons and zoos. If don't follow a few proper instructions, it will be difficult and dangerous. But if you do as the instruction, you can finish the job easily.
The instructions for razor concertina wire installation
When a fence to be installed on the fence, you need to install bracket to welding or nails on each pillar (pillar) you also should remember that the height of a fence over a 50mm diameter of more barricades, the best distance between the brackets should be 3-4 meters, the form and method of attachment to the fence bracket according arbitrary Construction of the fence.
Concertina wire stretched the operating position and enshrined in the arm steel wire diameter of 2mm at two points. When you install the next round of the first cycle of extreme spiral connected with the extreme spiral second spiral steel wire diameter of 2mm in two diametrically opposite field.
The requirement to stop unauthorized access by unauthorized persons into the territory of protected sites allows for a spiral barrier (SBB) concertina in enterprises of all sectors, It is not only as a main technical means of protection, but also in conjunction with electronic means of detection.
Barbed wire concertina make it possible to erect a secure physical barrier, both the permanent and temporary nature, with minimal cost.
- Prev : The synopsis of razor wire
- Next:No Article
